Mammoth Ivory Chunky pieces for inlay, jewelry , small carvings etc.  Each of these mostly 4 1/2" to 5" long pieces has been run through a bandsaw and are flat on one side, most are over 1" wide. The thickness varies from 1/8" up to  1 1/4", This  material is good for making jewelry, small carvings, guitar picks etc.  Most pieces have some layer separations and cracks, look at the photos of the ends of sample #1 pound bags. Pieces can be cut shorter with a hacksaw if you don't have a bandsaw and then layers can be popped apart with a screwdriver or hammer and chisel.  There is a mix of thick and thin. Be aware of your state laws regulating mammoth ivory. You will recieve a lot similar to the photo.